Hot Air Dryer

Special Features

Insulated container to prevent heat loss
Front open able door for easy cleanout
Uniform heat distribution
Efficient for high temperature drying up till 200°C
All material contact points are non-ferrous
Equipped with highly isolated blower for long life spam
Insulated chamber to prevent heat loss heater
Incoloy type tubular heater to achieve set temperature rapidly
Viewing window for material level monitoring
Equipped with PID controller for delivering accurate temperature
High pressure centrifugal with adjustable air damper for appropriate air flow
Discharge chamber with removable magnet to prevent flow of ferrous material
Drain port in discharge valve for quick change over of material
Lightweight & robust construction of equipment suitable for both offline & online application
Equipped with audible & visual alarm on faults
Over shoot of temperature can be prevented by high heat thermostat
Cool down function to avoid lumps formation
Digital display for set temperature & actual temperature
Overload protection for blower motor
Suitable for conveyors and vacuum loaders

Optional Features

24x7 auto start timer
Hot air recycler
Insulation on cylinder for high temperature application (Above 200°C)

Specifications

Model	Capacity (Liters)	Height (mm)	Width (mm)	Depth (mm)	Heater Capacity in KW	Blowing Power in Watts	Voltage
DHAD-50	60	1110	790	390	2.7	90	415V 3 Ph.
DHAD-100	100	1220	850	450	3.9	200	415V 3 Ph.
DHAD-150	150	1310	1020	660	6	250	415V 3 Ph.
DHAD-200	200	1390	1220	660	6	250	415V 3 Ph.
DHAD-300	300	1640	1250	840	10	400	415V 3 Ph.
DHAD-400	400	1840	1250	840	12	400	415V 3 Ph.
DHAD-600	600	1910	1360	990	18	750	415V 3 Ph.
DHAD-800	800	2260	1370	980	18	750	415V 3 Ph.
DHAD-1200	1200	2600	1400	1400	24	1500	415V 3 Ph.
DHAD-1500	1500	2900	1400	1400	24	1500	415V 3 Ph.
DHAD-2000	2000	3100	1650	1650	30	5500	415V 3 Ph.
DHAD-3500	3500	3700	1950	1950	45	5500	415V 3 Ph.

Send Enquiry for Hot Air Dryer

Get an Instant Quote

Hopper Loader

Ask For Price

Special Features

Stainless steel construction
Easy to operate Floor mounted panel
Easy cleaning & maintenance through Hinged lid
Tilted receiver towards operator for easy cleanout
Large discharge for fast material dumping
Inbuilt filters/cyclone to prevent solid contamination inside blower
Equipped with inbuilt audible and visual alarm for fault indication
Inbuilt safety for blower motor against overload
Microprocessor/PLC controller for trouble free access
Food grade wire braided antistatic hose for material conveying
Different categories of receiver options available depending upon the application
Suitable for silos & Central Conveying System
Equipped with most reliable & maintenance free blower

Optional Features

Automatic filter cleaning
Automatic line cleaning
Ratio loading
Castor Wheel for panel
Intermediate hopper
Ceramic coating in receive for highly frictional materials

Specifications

Model	DHL2(SP)	DHL7	DHL14	DHL28	DHL85	DHFL12	DHFL32	Model Nomenclature
Loader/Receiver Volume Liters	6	6	14	28	85	12	32	@DHL2 - Single Phase Hopper Loader
Loader Body Diameter mm+	203	203	304	304	635	254	381	@DHL2 - Single Phase Hopper Loader
Loader Height mm	640	470	475	600	1155	690	900	@DHL2 AB - Single Phase Hopper Loader with Ratio Valve
Material/Vacuum Line Size mm(inch)	40(1.5")	40-50-60 (1.5"-2"-2.5")			(2.5",3",4")	50-60-75 (2"-2.5"-3")		@DHL2 AB - Single Phase Hopper Loader with Ratio Valve
Vacuum Blower Size Kw	0.9	0.9-1.5-2.2	105-2.2-4	4-5.5-7.5	7.5	4	7.5	@DHL7 MC- 3 Phase hopper loader with Manual Cleaning
Nominal Throughput kg/hr.	30	150-200	300-600	600-750	1200	250	500	@DHL7 AC- 3 Phase hopper loader with Auto Cleaning
Optional	Automatic filter cleaning / Ratio valve / Positive discharge / Common line valve / Photo Electric Material Sensor / Intermediate Hopper
Supply Voltage	1 Ph. 230v	3 Ph. 415v	3 Ph. 415v	3Ph.415v	3 Ph. 415v	3 Ph. 415v	3 Ph. 415v	@DHL7 AB- 3 Phase hopper loader with Ratio Valve
Compressed Air Requirement	28.3 Liters / min. @ 5.51 bars

Model	Twin Loader	Trio Loader	Quadruple Loader
Receiver size	DHL-7x2	DHL-7x3	DHL-7x4
Vacuum Blower size - Kw	1.5 / 2.20	2.2 / 4	2.2 / 4
Throughput - Kg/Hr.	80x2 / 100x2	80x3 / 100x3	50x4 / 60x4
Receiver size	DHL-14x2	DHL-14x3	DHL-14x4
Vacuum Blower size - Kw	2.2 / 4	4 / 5.5	4
Throughput - Kg/Hr.	100x2 / 150x2	130x3 / 150x3	100x4
Receiver size	DHL-28x2	DHL-28x3	DHL-28x4
Vacuum Blower size - Kw	5.5 / 7.5	5.5 / 7.5	7.5
Throughput - Kg/Hr.	170x2 / 250x2	170x3 / 200x3	150x4
Options	Automatic filter cleaning / Ratio valve / Positive discharge / Common line valve / Photo Electric Material Sensor / Intermediate hopper

Send Enquiry for Hopper Loader

Get an Instant Quote

Dehumidifier

Ask For Price

Special Features

Japan make Honeycomb rotor
Metal construction of Honeycomb rotor for High temperature application
Rock steady dew point at -50°C
Display of return air temperature
Least Operational cost due to low regeneration
Liner air flow across the surface of rotor
Tabular & low resistance heaters increase response time
Audible and visual alarm on fault
User-friendly maintenance
Precise (+/-3°C) adjustable dew point control (Option)
Temperature setback to reduce energy consumption when machine throughput is reduced or stopped.
In built return air after cooler
Uniform mass air flow ensure that each pellet is dried
Even air & heat distribution throughout the dryer
Compact & portable design with castor wheel for randomly changing machine.
Insulated side wall maintain temperature at desired level in hopper
Most compatible for PET application
Smooth interior surface to prevent air restriction
Efficient drying with minimum down time
Large hinged doors for easy cleaning
Removable spreader cones makes cleaning fast and easy
Sight glass for viewing material level within the hopper
Capabilities to offer Central dryer with multiple resin or quick change over of different material

Optional Features

Volatile trap
Pre-cooler
Pneumatic slide gate valve
Butter Fly Valve at Hopper outlet
Drawer Magnet
Dew Point Monitor/Control
Filter Sensor

Specifications

Model	Process (m³/hr)	Process Blower (Kw)	Process Heater (Kw) Optional	Regen Blower (Kw)	Regen Heater (Kw)	Pipe Dia (inch)	Total Load in Kw	Dimensions
Model	Process (m³/hr)	Process Blower (Kw)	Process Heater (Kw) Optional	Regen Blower (Kw)	Regen Heater (Kw)	Pipe Dia (inch)	Total Load in Kw	H(mm)	W(mm)	D(mm)	Weight(Kw)
DM-50	50	0.4	4	0.25	3	2"	8	1670	560	620	120
DM-80	80	0.75	6	0.25	3.5	2"	10	1670	560	620	120
DM-120	120	0.75	10	0.25	3.5	2"	14	1730	650	800	140
DM-150	150	1.5	10	0.4	4	2.5"	16	1730	650	800	215
DM-200	200	1.5	15	0.4	5.4	2.5"	22	1970	700	1140	225
DM-300	300	2.4	15	0.75	6	3"	24	1970	700	1140	240
DM-400	400	3.75	30	0.75	7.2	3"	42	1970	750	1300	280
DM-500	500	5.5	45	1.5	10	4"	62	1970	750	1300	290
DM-700	700	5.5	60	1.5	10	4"	77	2150	1000	1800	300
DM-1000	1000	9	60	2.4	15	5"	86	2150	1000	1800	400
DM-1500	1500	9 x 2	90	3.4	20	6"	131	2150	1500	1800	510
DM-2000	2000	13 x 2	120	5.5	20	8"	171	2150	1500	1800	630
DM-3000	3000	13 x 3	180	7.5	30	8"	256	2640	1600	2160	760

Send Enquiry for Dehumidifier

Get an Instant Quote

Volumetric Feeder

Ask For Price

Special Features

Robust construction and user friendly design equipped with stepper motor for high accuracy and repeatability
Easy clean out with hinged motor assembly.
Detachable hopper for quick change of additives.
Five options of screw for different sizes of master batch & different flow ratio.
High temperature working capacity for Indian condition.
PLC based control equipped with 5” color touch screen display for quick access to settings & parameters
Easy to synchronize with machine.
Inbuilt different modes of program like injection, extrusion or blow molding
No additional signal converters are required for extrusion machines.
Accuracy & stability of dozing is maintained due to stepper motor having minimum rotation of 0.4°C it also maintains controllable speed within tolerance of 0.4 RPM.
Dosing capacity from 0.04Kg./Hr. to 73Kg./Hr.
Additive is added directly into the center of the main material flow due to its perfect mechanical placement.
Clean in less than 60 seconds.
Due to provision of optional cooling water circulation adapter, this design offers most suitable isolation to master batch from high temp. of pre heated material, preventing thermal degradation of master batches.

Optional Features

Special screw for feeding regrind material
Dual dosing Unit
Material level sensor
5’ discharge base
Cooling jacket on feeding throat
Inline and offset inter-mixer
Can be equipped with hopper material level sensor.

Specifications

Hopper Capacity (Liter)	20	Code	Description	Dosing capacity kg/hour	Dosing capacity Gram/Sec.
A	475	Auger 1	3/8 x 1/4	0,04 to 3,6	0.011 to 1
B	150	Auger 1	3/8 x 3/8	0,07 to 7,00	0.019 to 1.94
C	455	Auger 1	1/2 x 1/2	0,20 to 10,9	0.058 to 3.028
D	220	Auger 1	3/4 x 3/4	0,5 to 33.0	0.138 to 9.166
E	165	Auger 1	3/4 x 3/4	0,5 to 33.0	0.138 to 9.166
F	540	Auger 1	1 x 1	0,5 to 73.0	1.1 to 20
Feeder Weight (kg)	19
Control Panel Dimension (mm)
Height	300
Width	230
Depth	160
Supply Voltage (50/60 Hz)	230v Ac
Total Running Amps	1A

Send Enquiry for Volumetric Feeder

Get an Instant Quote

Mould Temperature Controller

Ask For Price

Special Features

Equipped with PID controller for precise control
Oil based system for maximum 180°C
Pump with high flow and pressure for best performance
Auto refilling available for Water based unit
Audible and visual alarm on fault
Overload protection of Pump
Closed loop electric control circuit to prevent temperature over shoot
All fluid contact points are non-ferrous
User friendly control
Level sensor to prevent dry running of Pump
Equipped with live operation indicator lamp

Special Features

Solenoid valves in inlet & outlet
Fluid distribution manifold
High temperature steel braided hose
High cooling capacity & indirect cooling in water-based system up to 70Kw

Specifications

Model	Circulating Media	Heating Capacity (Kw)	Max. Temp. (°C)	Nominal Cooling Capacity (Kw)	Pump Pressure (Bar)	Pump Motor (Kw)	Flow Rate (LPM)	Tank Volume (Ltr.)	Weight (Kg.)
DMTC-0-3	Oil	3	180	20	3.8	0.5	65	16	60
DMTC-0-6	Oil	6	180	20	3.8	0.5	65	16	60
DMTC-0-9	Oil	9	180	20	3.8	0.5	65	16	60
DMTC-0-12	Oil	12	180	28	5	2.2	100	45	100
DMTC-0-18	Oil	18	180	28	5	2.2	150	45	120
DMTC-W-3	Water	3	95	20	3.8	0.5	65	16	60
DMTC-W-6	Water	6	95	20	3.8	0.5	65	16	60
DMTC-W-9	Water	9	95	20	3.8	0.5	65	16	60
DMTC-W-12	Water	12	95	28	5	2.2	100	45	100
DMTC-W-18	Water	18	95	28	5	2.2	150	45	120
Operating Voltage	415v, 50 Hz, 3 Phase with Neutral and Earthing
Control Voltage	230v

Send Enquiry for Mould Temperature Controller

Get an Instant Quote

Flake Cutter

Ask For Price

Special Features

Flake cutter blades are suitable for recycling and restoring of conventional sheets, Tube plastics, profiles, packaging plastics, extrusion mold products and runners etc.
DSG F series granulators are adopted with sealed bearings which can handle long hour operation. The unique design of the cutter ensures the uniform cutting.
Over load protection of motor.
Rotary & Stationery blade for uniform grinding
Detachable screen & material bin for easy clean out
Openable cutting chamber
Easy to use with conveyor belt
Thermally treated blades for long life
Easy to grind material of minimum thickness 20 microns

Optional Features

Customized screen mesh
Conveyor belt for material feeding
Sound proofing
Powder separation kit
Cooling options for cutting chamber
Cyclone separator with material bin for material collection

Specifications

Model	DSG-F 230	DSG-F 300	DSG-F 400	DSG-F 500	DSG-F 600	DSG-F 800	DSG-F 960	DSG-F 1100	DSG-F 1200
Grinding Chamber (mm)	230x200	310x200	410x240	510x300	610x330	815x470	960x610	1100x800	1200x800
Grinding Capacity (Kg./H)	100-150	150-200	200-250	300-350	350-450	450-600	800-1000	1000-1200	1000-1500
Stationary Cutter	2	2	2	2	4	4	4	4	4
Rotary Cutter	6	9	12	15	18	24	30	33	36
Mesh Size (mm)	8	8	8	10	10	10	12	12	12
Kw	4	5.5	7.5	11	15	22/30	37/45/57	75	75
HP	5	7.5	10	15	20	30/40	50/60/75	100	100
Dimensions (LxWxH)	890x640x1145	1010x715x1300	1010x815x1330	1290x975x1670	1290x1075x1740	1735x1525x2180	1950x1760x2740	2510x2060x3700	2510x2100x3700
Dimensions SP (LxWxH)	1200x870x1510	1320x840x1580	1320x940x1640	1640x1080x1980	1940x1180x2050	1850x1540x2680	2050x1850x2860	2590x2230x3610	2590x2230x3610
Approx N.W. for (Kg.)	290	435	500	900	970	2000	3000	6000	6500
Approx N.W. for SP (Kg.)	400	435	604	900	1180	2380	3500	6500	6800
Maximum Cutting Thickness (mm)	4	5	6	7	8	10	14	14	15

Send Enquiry for Flake Cutter

Get an Instant Quote